Mounts & Load Cells

The CAS-SP9M tank mount assembly uses a hermetically sealed canister load cell with two attached mounting plates. The lower plate is rigidly mounted to the load cell. The top plate allows horizontal expansion but does not separate from the load cell. Capacities range from 50K to 300K.

Very popular, self-checking, easy to install, center pivot loading mild steel or stainless steel double ended shear beam mount. Mild steel or stainless steel environmentally protected to hermetic seal welded cap IP67 rated load cells are available in capacities from 1,000 lbs. to 125,000 lbs.

Mild steel and stainless steel single ended shear beam mount assembly with articulating mounting plate. Mild steel or stainless steel load cells with hermetic seal welded cap, IP67 rated. Ranging in capacities from 250 lbs. to 20,000 lbs.

CAS-5213 – Galvanized steel and stainless steel single ended shear beam mount with multi-direction sliding system. Stainless steel load cell with complete hermetic seal, rated IP68/IP69K. Available in capacities from 500 lbs. to 22,500 lbs.

Single Ended Shear Beam

Stainless steel single ended shear beam mount with neoprene isolation pad. Accommodates vibration and thermal expansion. Mild steel or stainless steel load cells rated IP65/IP67 with capacities from 50 lbs. to 5,000 lbs.

Canister Load Cell

Double Ended Shear Beam Load Cell

Double Ended Shear Beam Load Cell

Single Ended Shear Beam Load Cell

Tension / Compression Load Cell