-
CAS-SP9M Series
The CAS-SP9M tank mount assembly uses a hermetically sealed canister load cell with two attached mounting plates. The lower plate is rigidly mounted to the load cell. The top plate allows horizontal expansion but does not separate from the load cell. Capacities range from 50K to 300K.
-
CAS-16M Series
Very popular, self-checking, easy to install, center pivot loading mild steel or stainless steel double ended shear beam mount. Mild steel or stainless steel environmentally protected to hermetic seal welded cap IP67 rated load cells are available in capacities from 1,000 lbs. to 125,000 lbs.
-
CAS-82M Series
Mild steel and stainless steel single ended shear beam mount assembly with articulating mounting plate. Mild steel or stainless steel load cells with hermetic seal welded cap, IP67 rated. Ranging in capacities from 250 lbs. to 20,000 lbs.
-
CAS-5213 Series
CAS-5213 – Galvanized steel and stainless steel single ended shear beam mount with multi-direction sliding system. Stainless steel load cell with complete hermetic seal, rated IP68/IP69K. Available in capacities from 500 lbs. to 22,500 lbs.
-
CAS-59M Series
Stainless steel single ended shear beam mount with neoprene isolation pad. Accommodates vibration and thermal expansion. Mild steel or stainless steel load cells rated IP65/IP67 with capacities from 50 lbs. to 5,000 lbs.
-
CAS-5304LB Series
Isolated tension mount assembly available with a stainless steel potted S beam load cell with either a galvanized steel or stainless steel mount. Capacities range from 220 lbs to 11,000 lbs.
-
CAS-23M Series
Mild or stainless steel single ended shear beam mount. Ideal for multi-directional movement w/self-checking. Alloy or stainless steel IP67 rated load cells feature environmentally protected or hermetic seal welded cap designs. 250 lbs to 10,000 lbs capacities.